User`s guide

Pin Row A Pin Row B Pin Row A Pin Row B

A38 USB_6_7_OC# B38 USB_4_5_OC# A93 GPO0 B93 VGA_HSYNC

A39 USB4- B39 USB5- A94 SPI_CLK B94 VGA_VSYNC

A40 USB4+ B40 USB5+ A95 SPI_MOSI B95 VGA_I2C_CK

A41 GND (FIXED) B41 GND (FIXED) A96 TPM_PP B96 VGA_I2C_DAT

A42 USB2- B42 USB3- A97 TYPE10# B97 SPI_CS#

A43 USB2+ B43 USB3+ A98 SER0_TX (*) B98 RSVD

A44 USB_2_3_OC# B44 USB_0_1_OC# A99 SER0_RX (*) B99 RSVD

A45 USB0- B45 USB1- A100 GND (FIXED) B100 GND (FIXED)

A46 USB0+ B46 USB1+ A101 SER1_TX (*) B101 FAN_PWMOUT

A47 VCC_RTC B47 EXCD1_PERST# A102 SER1_RX (*) B102 FAN_TACHIN

A48 EXCD0_PERST# B48 EXCD1_CPPE# A103 LID# B103 SLEEP#

A49 EXCD0_CPPE# B49 SYS_RESET# A104 VCC_12V B104 VCC_12V

A50 LPC_SERIRQ B50 CB_RESET# A105 VCC_12V B105 VCC_12V

A51 GND (FIXED) B51 GND (FIXED) A106 VCC_12V B106 VCC_12V

A52 PCIE_TX5+ (*) B52 PCIE_RX5+ (*) A107 VCC_12V B107 VCC_12V

A53 PCIE_TX5- (*) B53 PCIE_RX5- (*) A108 VCC_12V

B108 VCC_12V

A54 GPI0 B54 GPO1 A109 VCC_12V B109 VCC_12V

A55 PCIE_TX4+ B55 PCIE_RX4+ A110 GND (FIXED) B110 GND (FIXED)

Note

The signals marked with an asterisk symbol (*) are not supported on the conga TCA.