User`s guide

19.1.5 Hibernate like Soft Off

In order to also reduce the energy consumption in hibernate mode (S4), the system will instead

be brought into Low Power Soft Off or Zero

Watt mode (S5) when it is switched off. However, the

energy consumption will only reduce if Low Power Soft Off or Zero Watt mode is enabled.

Disabled

The system will be brought into hibernate mode (S4).

Enabled

Instead of going into hibernate mode (S4), the system will be brought into Low Power

Soft Off or Zero Watt mode (S5).

19.1.6 USB At Power Off

Enables/disables the power supply for the USB ports. This option is only available if

Low Power Soft Off and Zero Watt mode are disabled.

Always off

The USB ports are no longer supplied with power after the system is shut down.

Always on

The USB ports continue to be supplied with power after the system is shut down.

19.2 Wake-Up Resources

This submenu is only available if neither Zero-Watt mode nor Low Power Soft Off is enabled.

19.2.1 LAN

Determines whether the system can be switched on via a LAN controller (on

the system board or expansion card).

Enabled The system can be switched on via a LAN controller.

Disabled The system cannot be switched on via a LAN controller.