User`s guide

18.9 HDD Security Conguration

18.9.1 HDD Password on Boot

Species whether a hard disk user password must be entered during every boot process.

Disabled It is not necessary to enter a hard disk user password during the boot process.

Enabled

Entry of a hard disk user password is required during every boot process.

18.10 HDD n / HDD-ID

Opens a submenu with information about the hard disk user password.

18.10.1 HDD Password Description

Allows the hard disk user and master passwords to be set, changed and deleted. The

hard disk user password must be set up before the

Enabled Security setting can be

carried out. The hard disk master password can only be changed if you have successfully

unlocked it in

POST with the hard disk master password.

18.10.2 HDD Password Conguration

Shows the current security status of the hard disk.

18.10.3 Security Supported

Yes is shown here if the device supports use of a hard disk user password. In this

case it is possible to assign a password to the hard

drive.

18.10.4 Security Enabled

Ye s is shown here if either a hard disk user password or a hard disk master

password has been assigned to the hard disk.