User`s guide
Copyright © 2014 congatec AG IGX1m02 85/134
17.11.1 Serial Port
Species whether the serial port is available.
Disabled The serial port is not available.
Enabled The serial port is available.
17.11.2 Device Settings
Shows the base I/O address and the interrupt used for access to the parallel port.
17.11.3 Change Settings
Species which base I/O addresses and which interrupts can be used by the BIOS
or operating system for the particular serial port.
Auto
The base I/O address and the interrupt are automatically
assigned.
IO=2F8h; IRQ=3;
The basic I/O address 2F8h and the Interrupt 3 are rmly
allocated.
IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;
The base I/O address is permanently assigned.
IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;
IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;
IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;
The values given in the list are available for the interrupt for automatic selection
by the BIOS or the operating system.
If conicts with other devices occur, this option should be converted to Auto.
17.12 Parallel Port Conguration
Opens the submenu to congure the parallel port (LPT).