User`s guide

Your selection is only valid for the current system boot. At the next system

boot, the settings in the Boot menu are valid again.

► If you want to start the BIOS Setup, use the cursor keys

to select the

Enter Setup entry and conrm your selection with the

Enter

k e y.

15.1.2 If you wish to boot immediately from LAN

► Press the function key

F 11

if you wish to boot directly via LAN and not from the drive which

is given as the rst position under Boot

Option Priorities in the Boot menu.

15.2 Navigating BIOS Setup

 or  cursor keys

Select menu from menu bar

 or  cursor keys

Select eld - selected eld is highlighted

Enter or ESC keys

Open submenu (marked by ►) Enter and leave ESC

+ or - keys (numeric keypad=

Change entry for eld

F2 function key

Set default entries for all menus

F3 function key

Reset entries that were in use when BIOS Setup was opened

15.3 Exiting BIOS Setup

► Select the Save & Exit menu from the menu bar to end BIOS Setup.



You can then decide whether you want to save the changed settings.

► Select the required option.

► Press the Enter key.