User`s guide
Copyright © 2014 congatec AG IGX1m02 67/134
15 Navigating BIOS Setup
15.1 Open BIOS Setup
► Switch on the system.
Wait until the screen output appears.
► Press function key
F2
.
► If the system is password protected, you must now enter the password and conrm with the
Enter
key. You will nd details on password
assignment under “Password Description”, section 18.1.
The BIOS Setup Main menu will be displayed on the screen.
► To display system-specic information, select System Information and press the
Enter
key.
The BIOS release information will be displayed:
The revision of the BIOS (e.g. R1.4.0)
Under “Board” you will nd the system board number.
15.1.1 If you want to open the Boot Menu immediately
You can use this function if you do not wish to boot your system from the drive which
is given as the rst setting under Boot Option Priorities
in the Boot menu.
► Start the system and wait until screen output appears.
► Press the function key
F12
.
On the screen, the boot options are shown as a popup window. You can now select the
drive from which you wish to boot the operating
system. The selection options are the same as the possible settings given under Boot Option Priorities in the Boot submenu.
► Use the
and
cursor keys to select which drive you want to boot the operating
system from now and conrm your choice with the
Enter
key.