User`s guide
Copyright © 2014 congatec AG IGX1m02 23/134
5 Display Options
5.1 Basic Display Features
The graphics engine of the conga-IGX supports maximum 2 independent displays, following combinations are possible:
Cong# DisplayPort V1.2
Maximum 3840 x 2160
LVDS
Maximum 1920 x 1200
DVI-I (digital)
Maximum 1920 x 1200
DVI-I (analog VGA)
Maximum 1920 x 1200
1 X X
2 X X (see note below)
3 X X
4 X X (see note below)
Note
Via DVI-I to VGA converter
Simultaneous use of DisplayPort and onboard LVDS is not possible; the appropriate G-series video channel can only be used exclusively for
DisplayPort (=LVDS disabled in BIOS Setup) or for LVDS (=LVDS enabled in BIOS Setup).
The DisplayPort output can be converted to a HDMI output, VGA output or (second) DVI output (appropriate converter required).
Windows 8 mode (=Secure Boot enabled) & LVDS support should only be used for BIOS revision R1.1.0, otherwise any graphics output may
be disabled. In case this happens, Setup Defaults should be enabled (see section Miscellaneous - BIOS/CMOS Reset).