User`s guide

Hard Disk Security9.6.2

This feature enables the users to set, reset or disable passwords for each hard drive in Setup without rebooting. If the user enables password

support, a power cycle must occur for the hard drive to lock using the new password. Both user and master password can be set independently

however the drive will only lock if a user password is installed.

Hard Disk Security User Password9.6.2.1

Feature Options Description

Primary/Secondary Master/Slave

HDD User Password

Enter password Set or clear the user password for the hard disk.

Note: This option will be shaded if the hard drive does support the Security

Mode Feature set but user failed to unlock the drive during BIOS POST.

Hard Disk Security Master Password9.6.2.2

Feature Options Description

Primary/Secondary Master/Slave

HDD Master Password

Enter password Set or clear the master password for the hard disk.

Note: This option will be shaded if the hard drive does support the Security

Mode Feature set but user failed to unlock the drive during BIOS POST.