User`s guide
Copyright © 2008 congatec AG B915m10 76/92
Feature Options Description
Parallel Port IRQ None
IRQ5
IRQ7
Species the interrupt for the parallel port.
Note
This setup menu is only available if an external Winbond W83627 Super I/O has been implemented on the carrier board.
SIO SMSC SCH3114 Conguration9.4.6.2
Feature Options Description
Serial Port 1/2/3/4 Address Disabled
3F8
2F8
3E8
2E8
Species the I/O base address of serial port 1/2/3/4.
Serial Port 1/2/3/4 IRQ 3
4
10
11
Species the interrupt of serial port 1/2/3/4.
Serial Port 2 Mode Normal
IrDA
ASK IR
Select serial port 2 mode.
IR Duplex Mode Full Duplex
Half Duplex
Serial port 2 infrared duplex mode.
Receiver Polarity High
Low
Serial port 2 infrared receiver polarity.
Xmitter Polarity High
Low
Serial port 2 infrared transmitter polarity.
Note
This setup menu is only available if an external SMSC SCH3114 Super I/O has been implemented on the carrier board.
Clock Conguration9.4.7
Feature Options Description
Spread Spectrum Disabled
Enabled
Enable spread spectrum clock modulation to reduce EMI.