User`s guide

Copyright © 2008 congatec AG B915m10 75/92
I/O Interface Conguration Submenu9.4.6
Feature Options Description
Onboard Audio Controller Azalia
AC97
Disabled
Congure onboard audio controller for AC’97 or Azalia (Intel High Denition Audio) mode.
Note: Azalia mode requires an external Azalia codec.
Onboard Ethernet Controller Enabled
Disabled
Enable or disable the onboard Ethernet controller.
►SIO Winbond W83627
Conguration
sub menu Opens sub menu.
Note: This setup node is only available if an external Winbond W83627 Super I/O has been implemented on the carrier board.
►SIO SMSC SCH3114
Conguration
sub menu Opens sub menu.
Note: This setup node is only available if an external SMSC SCH3114 Super I/O has been implemented on the carrier board.
SIO Winbond W83627 Conguration9.4.6.1
Feature Options Description
Serial Port 1/2
Conguration
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Species the I/O base address and IRQ of serial port 1/2.
Serial Port 2 Mode Normal
IrDA
ASK IR
Species the mode for serial port 2.
IR Duplex Mode Full Duplex
Half Duplex
Select IRDA full or half duplex function.
IR I/O Pin Select SINB/SOUTB
IRRX/RTX
Select receiver and transmit pins for IRDA mode.
Parallel Port Address Disabled
378
278
3BC
Species the I/O base address used by the parallel port.
Parallel Port Mode Normal
Bi-directional
ECP
EPP
ECP&EPP
Species the parallel port mode.
EPP Version 1.9
1.7
Species the EPP version.
Parallel Port DMA DMA0
DMA1
DMA3
Species the DMA channel for parallel port in ECP mode.