User`s guide

Copyright © 2008 congatec AG B915m10 72/92
Feature Options Description
SDVO Port B Device None
DVI
TV
CRT
LVDS
DVI-Analog
Select the SDVO device connected to this port.
SDVO Port C Device None
DVI
TV
CRT
LVDS
DVI-Analog
Select the SDVO device connected to this port.
SDVO/DVI HotPlug
Support
Disabled
Enabled
If set to Enabled the Windows XP/2000/Vista graphics drivers will support ‘Hotplug’ of DVI monitors connected to
a DVI SDVO transmitter. This means that a DVI monitor connected while the Windows XP/2000/Vista system is
already running will automatically be detected and added to the output display device list.
Display Mode Persistence Disabled
Enabled
Display mode persistence means that previous display device congurations can be ‘remembered’ and restored
by the system. E.g. a dual view DVI conguration will automatically be restored if both DVI monitors are
connected again, even if during an earlier boot only one DVI monitor had been connected and was active.