User`s guide
Copyright © 2008 congatec AG B915m10 14/92
Supply Voltage Standard Power1.4
12V DC ± 5%•
The dynamic range shall not exceed the static range.
Electrical Characteristics1.4.1
Power supply pins on the module’s connectors limit the amount of input power. The following table provides an overview of the limitations for
pinout Type 2 (dual connector, 440 pins).
Power Rail Module Pin Current
Capability (Amps)
Nominal Input
(Volts)
Input Range
(Volts)
Derated Input
(Volts)
Max. Input Ripple
(10Hz to 20MHz)
(mV)
Max. Module Input Power
(w. derated input)
(Watts)
Assumed
Conversion
Efciency
Max. Load
Power
(Watts)
VCC_12V 16.5 12 11.4-12.6 11.4 +/- 100 188 85% 160
VCC_5V-SBY 2 5 4.75-5.25 4.75 +/- 50 9
VCC_RTC 0.5 3 2.0-3.3 +/- 20
Rise Time1.4.2
The input voltages shall rise from 10% of nominal to 90% of nominal at a minimum rise time of 250V/s. The smooth turn-on requires that, during
the 10% to 90% portion of the rise time, the slope of the turn-on waveform must be positive.
Nominal Static Range
Dynamic Range
Absolute Minimum
Absolute Maximum12.60V
11.40V
12V
12.10V
11.90V