English

27
XTX / ETXTools
www.congatec.com
congatecTechnologyQsevenCOM Express
®
conga-XKIT
This complete kit provides the ability to start
evaluating XTX™ modules immediately.
Contents:
conga-XEVAL evaluation carrier board
conga-Xdebug Post-Code and debug card
conga-FPA2 flat panel adapter with cables
ATX power supply with cables
USB Memory Stick
conga-XDVI DVI evaluation platform
Cable set for IDE, SATA, Floppy Drives
conga-XEVAL
Evaluation Board for XTX™ modules. To achieve a
quick start with XTX™ congatec offers an evaluation
carrier board, which routes all the XTX™ signals to
standard interface connectors. With this you`re
able to check out all of the innovative XTX™
features and your specific expansions immediately.
2x PCI Express
2x Express Card Socket
4x 32 Bit PCI
1x LPT, 2x COM, 1x PS/2 Keyboard and Mouse
10/100 Ethernet
6x USB (2 routed to Express Card Sockets)
IrDA connector
COM3+4 via carrier board Super I/O
LPT2 via carrier board super I/O
4x SATA, 2x IDE (master/slave)
Audio: Additional AC`97 Audio Codec, SPDIF
optical, Line in/Out (stereo), Mic in (mono)
conga-Xdebug
XTX™ Debug Platform. The conga-Xdebug provides
a debug platform for your application specific
carrier board. Simply use it as a transparent debug
interface between your carrier board and the XTX™
module.
Postcode Display for LPC or PCI
LPC Firmware Hub Flash (FWH)
1x SATA Connector
Power connector for carrier board independant
operation
VGA / Keyboard / Mouse / COM / USB
Power and Reset Buttons
LED`s
•4xGPIOStatus
• 4xCommandByteEnable(CBE)
for PCI Bus activity
Size: 95 x 114 mm
conga-XDVI
Evaluation Platform to convert SDVO
to DVI-D. The conga-XDVI provides the
ability to evaluate the SDVO features
found on most of congatec`s XTX™
modules. It`s fully supported by the
congatec Embedded BIOS.
SDVO to 2x DVI-D
• 2xChrontelCH7307C
XTX™ - Engineering Tools