English

23
i
COM Express
®
XTX / ETXTools
www.congatec.com
Qseven Technology congatec
SMART Battery Manager Module
conga-SBM²C is a complete battery manager sub system
implemented as a plug in module. This COM Express
®
version
supports 12V power line.
Supports battery configurations 2S1P up to 4S3P
Parallel battery operation (sequential on request)
S3 support (Suspend to RAM)
LEDs provide a direct view of charging and battery
capacity status
Input voltage of 19V DC, with input power delimitation
Output 12V / ~70W and 5V / ~30W, 5V Standby ~1W
Battery charging max. 17V, max. 3A total
Size 68 mm x 110 mm x 12.5 mm
COM Express
®
- Engineering Tools
conga-Cdebug
COM Express
®
Debug Platform. The conga-Cdebug provides a
debug platform for your application specific carrier board. Simply
use it as a transparent debug interface between your carrier board
and the COM Express
®
module.
Postcode display for LPC or PCI
LPC Firmware Hub Flash (FWH)
2x SATA connector
Power connector for carrier board independent operation
VGA
2x USB
Power and reset switch
LED`s:
• 4xGPIOstatus
• 4xCommandByteEnable(CBE=PCIbusactivity)
Size 95 x 95 mm
conga-ADD2DP
Add2 Card for DisplayPort
The conga-ADD2DP provides two DisplayPort
and two HDMI interfaces when used in conjunction
with the conga-CEVAL and the conga-BM45,
conga-BS45, conga-CS45, conga-BM57, conga-BS57.
conga-BE57 or conga-BM67.
More Engineering Tools
on page 30ff.