User`s guide

Conexant RCV56 HSF User’s Guide

Modem Commands:

Command Default Permissible Range

ATA - Do not use

ATB B0 Do not set to B1

AT&G &G0 &G2

AT&P &P0 &P1

ATSn see table below

S register

Default Permissible Range

s6 2 2 to 6

Call Attempts/Retries:

Applications software shall be configured so that no more than 3 attempts are made to

establish a connection to a given number (Note: if the modem can detect service tones,

up to10 attempts can be made). If the call sequence is unsuccessful, there shall be a

delay of at least 30 minutes before attempting to call the number again.

Failure to set the modem and any application software used with the modem, to the

values shown as above will result in the modem being operated in a non-compliant

manner.

Consequently, this would be in violation of the Labeling Notice for this equipment,

and the Telecommunications ACT 1997 prescribes penalties for the connection of

non-compliant equipment.