User`s manual

• HTTP Server Port: This field allows the user to specify the port of the Web access. . For
example, when it is changed to 1001, the HTTP server address for the LAN side is
http://10.0.0.2:1001.
• FTP server: This field allows the user to enable or disable the FTP connection.
• TFTP server: This field allows the user to enable or disable the TFTP connection.
• DMZ: A DMZ (De-Militarized Zone) is added between a protected network and an external
network, in order to provide an additional layer of security. When there is a suspected
packet coming from WAN, the firewall will forward this packet to the DMZ host.
• DMZ Host IP: The IP address of the DMZ host at LAN side.
• DHCP Relay: If it is enabled, the DHCP requests from local PCs will forward to the DHCP
server runs on WAN side. To have this function working properly, please disable the NAT
to run on router mode only, disable the DHCP server on the LAN port, and make sure the
routing table has the correct routing entry.
• DHCP Target IP: The DHCP server runs on WAN side.
• IGMP Proxy: Here is the global setting for IGMP Proxy. If it is enabled, then the enabled
IGMP Proxy on WAN PVCs will be working. Otherwise, no WAN PVC can have IGMP
Proxy working on it.
• PPP connect on WAN access: If it is enabled, the PPP session will be automatically
established when there is a packet wants to go out the WAN.
• PPP Half Bridge: When the PPP Half Bridge is enabled, only one PC is able to access
the Internet, and the DHCP server will duplicate the WAN IP address from the ISP to the
local client PC. Only the PC with the WAN IP address can access the Internet.