User`s manual

environment that makes the route entry applicable. It is removed from the Routing Table
whenever the route entry becomes not applicable. e.g. If the route entry’s Gateway is
associated with a dynamic Network Interface but the connection is not established, then
the route entry does not appear in the Routing Table. When that interface comes up later,
the route entry is then added.
• If the selected Network Interface is static or is dynamic and the connection is already up,
then the route entry appears in the Routing Table immediately. If there is a Gateway
associated with the selected Network Interface, then that Gateway’s IP address appears
in the Gateway field of the route entry
• If the selected Network Interface is dynamic but the connection is not established, then the
route entry does not appear in the Routing Table. When the interface comes up later, the
route entry is then added.
System Default Gateway Configuration
The system-wide Default Gateway now provides three options: Auto,
User-selected Network Interface, and None.
• None: This field allows the user to choose to have no Default Gateway in the CPE
• Auto: This field allows the user to select the CPE to automatically decide the Default
Gateway. (System Default)
• User-selected Network Interface: This field allows user to select a Network Interface
from a list (PVCs, PPP Sessions, USB and LAN). This option lets the user to associate the
system-wide Default Gateway to a Network Interface, static or dynamic, and provides a
way to fix the Default Gateway to a dynamic Network Interface before the interface is
established.
Route Configuration
• Destination: This field allows the user to enter the remote network or host IP address for
the static routing.
• Netmask: This field allows the user to enter the Subnet Mask for the static routing.
• Gateway: This field allows the user to enter the IP address of the gateway device that
allows the router to contact the remote network or the host for Specified IP or select an
Interface for the Gateway.
• Manually Configured Routes: This field displays the static route entries entered by the
user.