User`s manual

3.3.18 Admin Privilege - Route Table
The Route Table page displays routing table and allows the user to manually enter the routing
entry. The routing table will display the routing status of Destination, Netmask, Gateway, and
Interface. The interface br0 means the USB interface; lo0 means the loopback interface; and ppp1
means the PPP interface. The Gateway is the learned Gateway
Routing Table
• The Gateway field of the static route entry allows users to either enter a Gateway IP
address or select a Network Interface.
• All user-defined routes retained in the CPE memory, regardless if they are already in the
Routing Table, are displayed on the same Route Table page.
• All user defined route entries kept in the CPE memory during run time are saved to flash
when the user chooses to save and reboot the CPE. When CPE restarts, it reloads all
saved user-defined routes to the CPE memory and tries to apply to the system.
• A user-defined route entry is added to the Routing Table whenever the system provides an