User`s manual

• User Configuration: The DNS proxy will use the user-configured preferred DNS server
and alternate DNS server. And all DNS query message will be sent to one of DNS servers.
Enter the DNS IP in the Preferred DNS Server and Alternate DNS Server fields.
• Auto Discovery and User Configuration: The DNS proxy’s table has all the IP
addresses of dynamically obtained and user configured DNS servers.
3.3.10 Configuration - Bridge Filtering
The Bridge Filtering configuration page allows the user to set the configuration of IP filtering.
• Source MAC: When the bridge filtering is enabled, enter the Source MAC address,
select Block and click Add. Then all incoming WAN and LAN Ethernet packets matched
with this source MAC address will be filtered out. If the Forward is selected, then the
packets will be forwarded to the destination PC.
• Destination MAC: When the bridge filtering is enabled, enter the Destination MAC
address, select Block and click Add. Then all incoming WAN and LAN Ethernet packets