User`s manual

3.3.8 Configuration - Virtual Server
The Virtual Server Configuration page allows the user to set the configuration of Virtual Server.
The Conexant firmware includes the Free BSD version firewall. All UDP/TCP ports are protected
from intrusion. If any specific local PCs need to be mapped to the UDP/TCP port on WAN side,
please input the mappings here.
• Public Port: This field allows the user to enter the port number of the Public Network.
• Private Port: This field allows the user to enter the port number of the Private Network. In
most cases, the private port number is same as public port number.
• Host IP Address: This field allows the user to enter the private network IP address for the
particular sever.