User`s manual

Chapter 3.3.12 Configuration - Wireless Security
Chapter 3.3.13
Configuration - Save Settings/Reboot Only
Chapter 3.3.14
Configuration - Reboot Without Saving
Chapter 3.3.15
Admin Privilege - WAN Status
Chapter 3.3.16
Admin Privilege - ATM Status
Chapter 3.3.17
Admin Privilege - TCP Status
Chapter 3.3.18
Admin Privilege - Route Table
Chapter 3.3.19
Admin Privilege - Learned (Bridge) MAC Table
Chapter 3.3.20
Admin Privilege - ADSL Configuration
Chapter 3.3.21
Admin Privilege - RIP Configuration
Chapter 3.3.22
Admin Privilege -Admin Level Username/ Password Configuration
Chapter 3.3.23
Miscellaneous Configuration
Chapter 3.3.24
Reset to Factory Default
Chapter 3.3.25
Diagnostic Test
Chapter 3.3.26
Code Image Update
Chapter 3.3.27
Network Code Image Update
Chapter 3.3.28
System Log
Appendix A
Glossary
Appendix B
Cabling / Connection
Declaration of CE
FCC Part 68
This equipment complies with Part 68 of the FCC Rules. On the bottom of this equipment is a label
that contains the FCC Registration Number and Ringer Equivalence Number (REN) for this
equipment. You must provide this information to the telephone company upon request.
The REN is useful to determine the quantity of devices you may connect to the telephone line and
still have all of those devices ring when your number is called. In most, but not all areas, the sum
of the REN of all devices connected to one line should not exceed five (5.0). To be certain of the
number of devices you may connect to your line, as determined by the REN, you should contact