User`s manual

set user's name & password for PPPoA on your router. Then save and reboot router, it will
work fine with your whole system. The computers should be set as DHCP client to get IP
dynamically.
• If your ISP provides RFC1483 Routed and the serial static IP address for you, there are
two methods you can use at this mode. First you can set the "router" mode and give
VPI/VCI of WAN. Then save and reboot router, it will work fine with your whole system.
The computers should be set the fixed assigned IP address at this method. Second
method you can set the "NAT" mode, give VPI/VCI/ IP address /netmask of WAN. Then
save and reboot router, it will work fine with your whole system. The computers should be
set as DHCP client to get IP dynamically.
3.3 Configuring with Web Browser
Open the web browser, enter the local port IP address of the ADSL Modem/Router, which default
at http://10.0.0.2, and click 'Go' to get the login page.
If you want to configure the device with administrator level, type admin in the username field and
epicrouter in the password field.