Installation guide

10
Chapter 2 : Amigo USB ADSL Modem Installation and Software Setup
WAN and LAN software drivers are supported. WAN and LAN applications support the Microsoft
Windows 98/98SE , Windows Me, Windows 2000 and Windows XP operating systems.
Be sure to follow the instructions provided for your PC’s operating system.
The following information may be required for software installation. Contact your DSL service provider
before proceeding with software installation.
• Type of Driver to be Installed – WAN and LAN software drivers are supported. The choice
depends upon your DSL service provider.
• IP Address Settings – the Amigo software installation process allows the server to dynamically
assign IP Address settings. If your application requires static setting of specific address information
you will need to know :
 IP Address
 Subnet Mask (for Bridged Ethernet applications only)
 Default Gateway (for Bridged Ethernet applications only)
• Name Server Information – the Amigo software installation process allows the server to
dynamically assign Name Server Address settings. If your application requires static setting of
specific address information you will need to know:
 Primary DNS Address
 Secondary DNS Address
 Primary WINS Address
 Secondary WINS Address
• ATM Virtual Path ID (VPI)
Note: Required if not using default values for driver type
• ATM Virtual Circuit ID (VCI)
Note: Required if not using default values for driver type
• Encapsulation type
Note: Required if not using default values for driver type
• Modulation type
Note: Required if not using default values for driver type
•
User Name (for PPP applications only)
• Password (for PPP applications only).