User's Manual

USB 2.0 WLAN card User’s Guide
0xxxxxx Conexant 5
Important Notice :
This device is a dual band 2.4 GHz / 5 GHz low power RF device
intended for home and office use in EU and EFTA member
states. In some EU / EFTA member states some restrictions may
apply. Please contact local spectrum management authorithies
for further details before putting this device into operation.
Regulatory Statement for FCC
FCC Information to User
This product does not contain any user serviceable components and is to be used with approved antennas only. Any
product changes or modifications will invalidate all applicable regulatory certifications and approvals
FCC Guidelines for Human Exposure
In order to comply with RF exposure limits, the user is advised to maintain a distance of at least 20 cm from the
antenna of this device while it is in use. The antenna is integrated within the plastic part of the enclosure.
FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received, including interference that may cause undesired operation.
Caution:
1--Within 5.15 to 5.25 MHz bands, UNII devices are restricted to indoor operations to reduce any potential harmfull
interference to co-channel Mobile Satelite Systems (MSS) operations.
2--High power radars are allocated as primary users in the 5.25 to 5.35GHz and 5.65 to 5.85GHz bands. These high
power radar stations can cause interference with and/or damage to this device.
FCC Radio Frequency Interference statement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area may cause harmful interference, in which case the user will be
required to correct the interference at his own expense.