User's Manual

USB 2.0 WLAN card User’s Guide
2 Conexant 0xxxxxx
2 Installation
Installation of this WLAN product is a simple two-step process consisting of:
1. Hardware installation
2. Configuring in Microsoft Windows.
Unpacking the USB WLAN card
Be certain that you have all the items listed below. This package contains:
• A USB WLAN card
• A USB cable
• User's manual
• Software for the modem
What You Need
You will need:
• A USB host PC system with Plug and Play enabled Windows Operating System
Hardware Installation
Exercise caution at all times when working with AC powered and static-sensitive
equipment. Discharge any static electricity from your body by touching any bare metal
surface of the PC system, such as its power supply cover.
This USB WLAN card needs to be used with the USB cable provided in the package.
1. Plug the small connector of the USB cable into the USB WLAN card
2. Plug the large connector of the USB cable into an available USB port of the host PC.
3. Now follow the steps outlined in the next section, Configuring Microsoft Windows.