User Manual
Table Of Contents
- Contents
- 1 Getting started
- 2 Installing the Access Point
- 3 Configuring the Access Point
- 3.1 Introduction
- 3.2 When to configure the Access Point
- 3.3 Starting the Web Interface
- 3.4 Launching Web Interface manually
- 3.5 Contents of Web Interface
- 3.5.1 Settings Summary
- 3.5.2 Wireless Settings
- 3.5.3 Security against unauthorized network access
- 3.5.4 To add a a client to the exception list
- 3.5.5 To delete a client from the exception list
- 3.5.6 Security against eavesdropping
- 3.5.7 Change WEP password
- 3.5.8 Security against unauthorized configuration
- 3.5.9 Identity
- 3.5.10 IP Settings
- 4 Troubleshooting
- 5 Technical specifications 11 Mbps WLAN Access Point
- 6 Regulatory notes and statements
- 6.1 Wireless LAN, Health and Authorization for use
- 6.2 Regulatory Information/disclaimers
- 6.3 USA-FCC (Federal Communications Commission) statement
- 6.4 FCC Radio Frequency Exposure statement
- 6.5 FCC Interference Statement
- 6.6 Export restrictions
- 6.7 Europe - EU R&TTE Declaration of Conformity
- 6.8 Restricted Wireless LAN device use in EU
- A TCP and IP settings
- B Wireless LAN
- Index
555004.doc
41
5 Technical specifications
11 Mbps WLAN Access
Point
5.1 General Specifications
5.2 Radio specifications
Standards supported
Compliant with ETS 300 328 and ETS 300 826 (CE marked)
IEEE 802.11 standard for Wireless LAN
All major networking standards (including IP, IPX)
Environmental specifications
Operating temperature (ambient) 0°C to 40°C (32°F to 104°F)
Humidity 95%
Power specifications
DC power supply In 110-230 VAC 50 Hz 150 mA
Out 5 VDC 1 A
11 Mbps WLAN Access Point In 5 VDC 1 A
Supported bit rates
11 Mbps
5.5 Mbps
1 Mbps (IEEE 802.11 DSSS compliant devices, using ASBF™ )
2 Mbps (IEEE 802.11 DSSS compliant devices, using ASBF™
Range
Per cell indoors approx. 50 meters (150 ft.) or more
Per cell outdoors up to 300 meters (1000 ft.)