Specifications

15
Depending on the operating status, the LED assumes different colours
(1) LED lights up green:
- a green light starts as soon as the Conergy WR unit has completed
the startup phase, it stays green as long as the operation of feeding
power into the network continues
- it indicates faultless operation of the photovoltaic equipment
(2) LED flashes green:
- as long as the photovoltaic equipment is operating without fault
- and an additional message is displayed on the screen
Note! A message appears for example if there is an insulation
fault, which however does not affect the function of the Conergy
WR. However for safety reasons we recommend that the insulati-
on fault is remedied as soon as possible.
The Conergy WR with display shows a status message.
If a message (e.g. „502“, Section „Status diagnosis and remedy) is shown,
rectify the relevant status and acknowledge this by pressing the „Enter“
button.
(3) LED lights up orange:
- The Conergy WR unit will enter the automatic startup-phase, as soon
as after sunrise the photovoltaic modules yield sufficient power output
LED for opera-
ting status
LED