Installation manual

ENGLISH
Conergy TS
Installation Manual
8
Important Notes
|
|
Typical open circuit assembly diagram
Typical system assembly
The table below indicates the system components:
DO NOT commence an installation until you have satisfied yourself that all safety issues
associated with working on and lifting components onto a roof have been addressed.
All work associated with the installation must comply with local authority regulations including
AS/NZS 3500.4.2. Where these installation instructions and local regulations are in conflict,
local regulations must prevail.
4 Installation Instructions
4.1
4.2
Module Number Tank Collector Model Number Tank Collector
TS180/2/0/E24/V/F20LC TS180/0/E24 1 x F20LC TS180/2/C/E24/V/E20BC TS180/C/E24 1 x E20BC
open circuit closed circuit
TS180/2/0/E24/V/E20BC TS180/0/E24 1 x E20BC TS180/2/C/E24/V/E20SB TS180/C/E24 1 x E20SB
open circuit closed circuit
TS180/2/0/E24/V/E20SB TS180/0/E24 1 x E20SB TS300/4/C/E24/V/E20BC TS300/C/E24 2 x E20BC
open circuit closed circuit
TS300/4/0/E24/V/F20LC TS300/0/E24 2 x F20LC TS300/4/C/E24/V/E20SB TS300/C/E24 2 x E20SB
open circuit closed circuit
TS300/4/0/E24/V/E20BC TS300/0/E24 2 x E20BC
open circuit
TS300/4/0/E24/V/E20SB TS300/0/E24 2 x E20SB
open circuit
4 Installation Instructions