User`s guide

CONFIGURATION
68
5.23. Automatic update configuration
In the window Automatic update it is possible to set automatic configuration update.
This choice enables that the router automatically downloads the configuration
and the newest firmware from the server itself. The configuration and firmware are stores
on the server.
By Enable automatic update of configuration it is possible to enable automatic
configuration update. By parameter Base URL it is possible to enter base part of the domain
or IP address, from which the configuration file will be downloaded. In the case that Unit ID is
empty, the contents of parameter Unite ID or MAC address is added to Base URL.
The configuration file name is from parameter Base URL, hardware MAC address of ETH0
interface and cfg extension. Hardware MAC address and cfg extension is connected
automatically and it isn’t needed to enter this. By parameter Unit ID enabled it defines the
concrete configuration name which will be download to the router. When using parameter
Unit ID, hardware MAC address in configuration name will not be used.
Automatic configuration update starts 5 minutes after turning on the router and then
every 24 hours or it is possible to set the time of automatic configuration in parameter Update
Hour. If the entered URL is different configuration than in the router then the router
downloads this configuration and restarts itself.
The changes in settings will apply after pressing the Apply button.
5.24. Change password
To open the dialog box for changing the access password select the Change Password
menu item. The new password will be saved after pressing the Apply button.
In basic settings of the router the password is set on default form root. For higher
security of your network we recommend changing this password.
5.25. Set real time clock
One - shot inner clock of the router setting can be called up in option Set Real Time
Clock item in the menu. Clocks are set according to the engaged NTP server after push-
button operation Apply.