User`s guide

CONFIGURATION
60
Example of the MIB browser:
It is important to set the IP address of the SNMP agent (router) in field Remote SNMP
agent. After enter the IP address is in a MIB tree part is possible show object identifier.
The path to objects is:
iso->org->dod->internet->private->enterprises->conel->protocols.
5.19. SMS Configuration
In the SMS Configuration menu it is possible to select automatic sending of SMS
messages following power up (Send SMS on power up) and at the start (Send SMS on PPP
connect) or the loss (Send SMS on PPP disconnect) of the PPP connection and at data limit
exceeded (Send SMS when datalimit exceeded). With switch-on parameter Send SMS when
binary input is active it is possible to define SMS for each of four binary inputs in windows
BIN1-SMS, BIN2-SMS, BIN3-SMS and BIN4-SMS, which will be sent if those binary inputs
are active. It is possible to send information to three telephone numbers. Unit ID is the name
of the router that it will send an SMS message to. Unit ID may have a random form.
In the second part of the window it is possible to set function Enable remote control
via SMS. After this it is possible to establish and close PPP connection by SMS message.
This control can be configured for up to three numbers. If is set Enable remote control via
SMS, all incoming SMS are processed and deleted. In the default settings this parameter is
turned on.
If no phone number is filled in, then it is possible to restart the router with the help
of SMS in the form of Reboot from any phone number. While filling of one, two or three
numbers it is possible to control the router with the help of an SMS sent only from these
numbers.