User`s guide

CONFIGURATION
48
5.11. NAT Configuration
To enter the Network Address Translation configuration, select the NAT menu item.
By checking off the Send all incoming packets to default server item and setting
the Default Server item it is possible to put the router into the mode in which all incoming data
from GPRS will be routed to the computer with the defined IP address.
If the Enable remote HTTP access field and port number is filled in, then configuration
of the router over web interface is possible.
Choice Enable remote Telnet access and port number makes it possible to access over
Telnet.
Choice Enable remote SNMP access and port number makes it possible to access to
SNMP agent.
The changes in settings will apply after pressing the Apply button.
Example of the configuration with one connection equipment on the router:
162.209.13.222
192.168.1.2
ppp0 10.0.0.1