User`s guide

EXPANSION PORT MOUNTING
33
3.2. Expansion port mounting for UR5i SL
Attention! Expansion port XPORT include when the router UR5i SL is switch off.
After unscrewing four screws (position 10) on the rear panel (position 5)
and removing it is possible to take out the B-UR-5i motherboard (position 1). The expansion
port XPORT (position 2) is connected to connector J3 (see below) of the router B-UR-5
motherboard (position 1) from TOP side. The expansion port is mounted to the motherboard
by the help of three spacers (position 9). After mounting the expansion port the box is
screwed together by the help of four screws.
Connector J3