User`s guide

DESCRIPTION
14
2.10.1. Connection of the PWR Supply Connector
Panel socket RJ12.
Pin
number
Signal
mark
Description
1 +UN Positive pole of DC supply voltage (+10 to +30 V)
2 NC Signal not connected
3 NC Signal not connected
4 +UN Positive pole of DC supply voltage (+10 to +30 V)
5 GND Negative pole of DC supply voltage
6 GND Negative pole of DC supply voltage
Circuit example:
• Panel socket MRT9.
Pin
number
Signal
mark
Description
1 +UN Positive pole of DC supply voltage (+10 to +30 VDC)
2 GND Negative pole of DC supply voltage
Circuit example:
The positive pole +UN is marked by a red socket on the power supply.
Pin 1 – +UN
Pin 2 – GND
Router
DC
+
Pin 1 – +UN
Pin 2 – NC
Pin 3 – NC
Pin 4 – +UN
Pin 5 – GND
Pin 6
–
GND
Router UR 5
DC
+