User`s guide

EXPANSION PORT MOUNTING

Basic delivered set of router includes:

• UMTS router,

• power supply,

• crossover UTP cable,

• external antenna,

• clips for the DIN rail

• installation CD containing instructions.

In addition to the basics it is possible to deliver:

• one or two expansion ports RS232, RS485/RS422, ETHERNET, M-BUSD or CNT

(separation columns are in distribution),

Module can be connected only

as follows.

PORT1 RS232, RS485/422, ETHERNET, M-BUSD, CNT

PORT2 RS232, RS485/422, M-BUSD

The router standard designed for:

• mounting to a panel using through holes (only UR5 v2 version),

• possibility to be put on a work surface,

• for mounting onto a DIN rail, the clips are included.

2.5. Antenna Connection

The antenna is connected to the router using the SMA connector on the front panel.

External antennas: