User`s guide

CONFIGURATION
80
By parameter Base URL it is possible to enter base part of the domain
or IP address, from which the configuration file will be downloaded. In the case that Unit ID is
empty, the contents of parameter Unite ID or MAC address is added to Base URL.
The configuration file name is from parameter Base URL, hardware MAC address of ETH0
interface and cfg extension. Hardware MAC address and cfg extension is connected
automatically and it isn’t needed to enter this. By parameter Unit ID enabled it defines
the concrete configuration name which will be download to the router. When using parameter
Unit ID, hardware MAC address in configuration name will not be used.
Automatic configuration update starts 5 minutes after turning on the router
and then every 24 hours or it is possible to set the time of automatic configuration in
parameter Update Hour. If the entered URL is different configuration than in the router then
the router downloads this configuration and restarts itself.
The changes in settings will apply after pressing the Apply button.
6.26. Change profile
To open the dialog box for changing profile select the Change Profile menu item.
Profile switch is making by press the button Apply. Change take effect after restarting router
by the help of button Reboot in web administration or by SMS message. It is possible select
the standard profile or up to three alternative profiles. It is possible to copy actual
configuration to selected configuration by selecting Copy settings from current profile
to selected profile.