User`s guide

CONFIGURATION
68
It is possible to send controls SMS in the form:
SMS Description
go online sim 1 Switch to SIM1 card
go online sim 2 Switch to SIM2 card
go online Switch router in online mode
go offline PPP connection termination
set out0=0 Set output I/O connector on 0
set out0=1 Set output I/O connector on 1
set out1=0 Set output expansion port XC-CNT on 0
set out1=1 Set output expansion port XC-CNT on 1
set profile std Set standard profile
set profile alt1 Set alternative profile 1
set profile alt2 Set alternative profile 2
set profile alt3 Set alternative profile 3
reboot Router restart
get ip Router send answer with IP address SIM card
By choosing Enable AT-SMS protocol on external port and Baudrate it is possible
to send/receive an SMS on the serial port.
By choosing Enable AT-SMS protocol on TCP port and enter the TCP port it is
possible to send/receive an SMS on the TCP port. SMS messages are sent by the help of
a standard AT commands. More about the AT commands in reference [1].
Choices Enable AT-SMS protocol on external port and Enable AT-SMS protocol
on TCP port mustn’t be chosen at the same time.