User`s guide

CONFIGURATION

M-BUSD status. Parameters Enable XC-CNT extension and Enable M-BUS extension can

not be checked together.

Every monitor value is uniquely identified by the help of number identifier OID - Object

Identifier. OID is finished by „.9“.

For binary input and output the following range of OID is used:

OID Description

.1.3.6.1.4.1.30140.2.3.1.0 Binary input BIN0 (values 0,1)

.1.3.6.1.4.1.30140.2.3.2.0 Binary output OUT0 (values 0,1)

For the expansion port CNT the following range of OID is used:

OID Description

.1.3.6.1.4.1.30140.2.1.1.0 Analogy input AN1 (range 0-4095)

.1.3.6.1.4.1.30140.2.1.2.0 Analogy input AN2 (range 0-4095)

.1.3.6.1.4.1.30140.2.1.3.0 Counter input CNT1 (range 0-4294967295)

.1.3.6.1.4.1.30140.2.1.4.0 Counter input CNT2 (range 0-4294967295)

.1.3.6.1.4.1.30140.2.1.5.0 Binary input BIN1 (values 0,1)

.1.3.6.1.4.1.30140.2.1.6.0 Binary input BIN2 (values 0,1)

.1.3.6.1.4.1.30140.2.1.7.0 Binary input BIN3 (values 0,1)

.1.3.6.1.4.1.30140.2.1.8.0 Binary input BIN4 (values 0,1)

For the expansion port M-BUSD the following range of OID is used:

OID Description

.1.3.6.1.4.1.30140.2.2.<address>.1.0 IdNumber – meter number

.1.3.6.1.4.1.30140.2.2.<address>.2.0 Manufacturer

.1.3.6.1.4.1.30140.2.2.<address>.3.0 Version – specified meter version

.1.3.6.1.4.1.30140.2.2.<address>.4.0 Medium – type of metered medium

.1.3.6.1.4.1.30140.2.2.<address>.5.0 Status – errors report

.1.3.6.1.4.1.30140.2.2.<address>.6.0 0. VIF – value information field

.1.3.6.1.4.1.30140.2.2.<address>.7.0 0. measured value

.1.3.6.1.4.1.30140.2.2.<address>.8.0 1. VIF – value information field

.1.3.6.1.4.1.30140.2.2.<address>.9.0 1. measured value

…

.1.3.6.1.4.1.30140.2.2.<address>.100.0

47. VIF – value information field

.1.3.6.1.4.1.30140.2.2.<address>.101.0

47. measured value