User`s guide

CONFIGURATION
48
If the Enable PPPoE bridge mode option selected, it activate the PPPoE bridge
protocol PPPoE (point-to-point over ethernet) is a network protocol for encapsulating Point-
to-Point Protocol (PPP) frames inside Ethernet frames. Allows you to create a PPPoE
connection from the device behind router. For example from PC which is connected to ETH
port router. There will be allot Ip address of SIM card to PC.
The changes in settings will apply after pressing the Apply button.
Attention! We recommend checking the GPRS connection in case of uninterrupted
running.
Annotation:
• MTU (Maximum Transmission Unit) – it is the identifier of the maximum size
of packet, which is possible to transfer in a given environment.
• MRU (Maximum Receiving Unit) – it is the identifier of the maximum size
of packet, which is possible to receive in a given environment.
Default value is 1500 bytes.
O ther settings may cause incorrect transmission of data.