User`s guide

EXPANSION PORT MOUNTING
29
3. Expansion port mounting
3.1. Expansion port mounting for UR5 v2
Attention! Expansion port PORT1 and PORT2 include when the router UR5 v2 SL is
switched off.
After removing front head of the box it is possible to take out the B-RB-v2
motherboard (position 1). The expansion port PORT1 (position 2) is connected to connector
J8 (see below) of the router B-RB-v2 motherboard (position 1) from TOP side. The expansion
port PORT2 (position 3) is connected to connector J3 (see below) of the router B-RB-v2
motherboard (position 1) from TOP side. The expansion port is mounted to the motherboard
by the help of three spacers (position 10). After mounting the expansion port the box is
inserted motherboard into box and kneaded front head in the box.