System information

1. CONFIGURATION OVER WEB BROWSER
Added module appears in the list of modules on the same page. If the module contains
index.html or index.cgi page, module name serves as a link to this page. The module can be
deleted using the Delete button.
Updating of the module can be done in the same way like adding a new module. Module
with a higher (newer) version will replace the existing module. The current module configura-
tion is kept in same state.
Programming and compiling of modules are described in the programming guide.
Figure 65: Added user module
There are for example these user’s modules:
Module name Description
MODBUS TCP2RTU Provides a conversion of MODBUS TCP/IP protocol to MDBUS
RTU protocol, which can be operated on the serial line.
Easy VPN client Provides secure connection of LAN network behind our router
with LAN network behind CISCO router.
NMAP Allows to do TCP and UDP scan.
Daily Reboot Allows to perform daily reboot of the router at the specified time.
HTTP Authentication Adds the process of authentication to a server that doesn’t pro-
vide this service.
BGP, RIP, OSPF Add support of dynamic protocols.
PIM SM Adds support of multicast routing protocol PIM-SM.
WMBUS Concentrator Allows to receive messages from WMBUS meters and saves
contents of these messages to XML file.
pduSMS Sends short messages (SMS) to specified number.
GPS Allows v2 router to provide location and time information in all
weather, anywhere on or near the Earth, where there is an un-
obstructed line of sight to four or more GPS satellites.
Pinger Allows to manually or automatically verify the functionallity of
the connection between two network interfaces (ping).
WiFi STA Allows router to behave as a classical WiFi client station.
IS-IS Add support of IS-IS protocol.
Table 68: User modules
76
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de