System information

1. CONFIGURATION OVER WEB BROWSER
Continued from previous page
SMS Description
set out1=0 Set output expansion port XC-CNT on 0
set out1=1 Set output expansion port XC-CNT on 1
set profile std Set standard profile
set profile alt1 Set alternative profile 1
set profile alt2 Set alternative profile 2
set profile alt3 Set alternative profile 3
reboot Router reboot
get ip Router send answer with IP address SIM card
Table 54: Control SMS
By choosing Enable AT-SMS protocol on expansion port 1 and Baudrate it is possible
to send/receive an SMS on the serial Port 1.
Item Description
Baudrate Communication speed expansion port 1
Table 55: Send SMS on serial PORT1 configuration
By choosing Enable AT-SMS protocol on expansion port 2 and Baudrate it is possible
to send/receive an SMS on the serial Port 2.
Item Description
Baudrate Communication speed expansion port 2
Table 56: Send SMS on serial PORT2 configuration
By choosing Enable AT-SMS protocol on TCP port and enter the TCP port it is possible to
send/receive an SMS on the TCP port. SMS messages are sent by the help of a standard AT
commands.
Item Description
TCP Port TCP port on which will be allowed to send/receive SMS messages.
Table 57: Send SMS on ethernet PORT1 configuration
1.25.1 Send SMS
After establishing connection with the router via serial interface or Ethernet, it is possible
to use AT commands for work with SMS messages.
60
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de