System information

1. CONFIGURATION OVER WEB BROWSER
1.23 SNMP configuration
To enter the SNMP configuration it is possible with SNMP agent v1/v2 or v3 configuration
which sends information about the router, eventually about the status of the expansion port
CNT or MBUS.
SNMP (Simple Network Management Protocol) provides status information about network
elements such as routers or end computers.
Item Description
Name Designation of the router.
Location Placing of the router.
Contact Person who manages the router together with information how to contact
this person.
Table 44: SNMP agent configuration
Enabling SNMPv1/v2 is performed using the Enable SNMPv1/v2 access item. It is also
necessary to define a password for access to the SNMP agent (Community).
The Enable SNMPv3 access item allows you to enable SNMPv3. Then you must define
the following parameters:
Item Description
Username User name
Authentication Encryption algorithm on the Authentication Protocol that is
used to ensure the identity of users.
Authentication Password Password used to generate the key used for authentication.
Privacy Encryption algorithm on the Privacy Protocol that is used to
ensure confidentiality of data.
Privacy Password Password for encryption on the Privacy Protocol.
Table 45: SNMPv3 configuration
In addition, you can continue with this configuration:
• By choosing Enable I/O extension it is possible to monitor binary inputs I/O on the router.
• By choosing Enable XC-CNT extension it is possible to monitor the expansion port CNT
inputs and outputs status.
• By choosing Enable M-BUS extension and enter the Baudrate, Parity and Stop Bits it is
possible to monitor the meter status connected to the expansion port MBUS status.
52
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de