System information

1. CONFIGURATION OVER WEB BROWSER
1.22 NTP client configuration
NTP client Configuration can be called up by option NTP item in the menu. NTP (Network
Time Protocol) allows set the exact time to the router from the servers, which provide the exact
time on the network.
By parameter Enable local NTP service router is set to a mode in which it operates as an
NTP server for other devices in the LAN behind the router.
By parameter Enable local NTP service it is possible to set the router in mode, that it can
serve as NTP server for other devices.
Item Description
Primary NTP Server
Address
IP or domain address primary NTP server.
Secondary NTP
Server Address
IP or domain address secondary NTP server.
Timezone By this parameter it is possible to set the time zone of the router
Daylight Saving Time By this parameter is possible to define time shift:
• No – time shift is disabled
• Yes – time shift is allowed
Table 43: NTP configuration
Example of the NTP conf. with set primary (ntp.cesnet.cz) and secondary (tik.cesnet.cz)
NTP server and with daylight saving time:
Figure 44: Example of NTP configuration
51
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de