System information

1. CONFIGURATION OVER WEB BROWSER
1.12 Backup Routes
Using the configuration form on the Backup Routes page can be set backing up primary
connection by other connections to internet/mobile network. For each back up connection can
be defined a pr iority. Own switching is done based on set priorities and state of the connection
(for Primary LAN and Secondary LAN).
It is necessary to check the Enable backup routes switching item to enable switching. The
check box at the beginning of each section of back up connection allows you to switch to the
corresponding type of connection (there are these check boxes: Enable backup routes switch-
ing for Mobile WAN, Enable backup routes switching for Primary LAN and Enable backup
routes switching for Secondary LAN).
Item Description
Priority Priority for the type of connection
Ping IP Address Destination IP address of ping queries to check the connection
(address can not be specified as a domain name)
Ping Interval The time intervals between sent ping queries
Table 23: Backup Routes
All changes in settings will be applied after pressing the Apply button.
Figure 22: Backup Routes
26
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. [phone] * Fax. [phone] * www.lucom.de