Specifications

CONFIGURATION
33
5.9. Firewall Configuration
By the help of a firewall are possible set IP addresses from which is possible remote
access on UR 5. The choice Allow remote access only from specified hosts is given for
easier configuration of hosts. In this firewall configuration is possible set up to four remote
accesses by the help of Source IP Address, Protocol and Target Port.
The changes in settings will apply after pressing the Apply button.
Example of the firewall configuration:
5.10. NAT Configuration
To enter the Network Address Translation configuration, select the NAT menu item. By
checking off the Send all incoming packets to default server item and setting
of the Default Server item it is possible to put the UR5 router into the mode in which all
incoming data from UMTS will be routed to the computer with the defined IP address.
If the Enable remote HTTP access and port number field is filled in, it is possible to
configure the router over the web interface.
10.0.2.123
1
7
1
.9
2
.5.
4
5
142.2.26.54
TCP/1000
ICMP
ALL