Specifications

DESCRIPTION OF THE UR5 ROUTER
13
The UR 5 connection to the PC:
• cable KD2 is connected to serial port PC (example COM1)
The UR 5 connection to equipment with full-value RS232 interface:
2.10.3. Connection of the Port1 Connector – RS485G
Panel socket RJ45.
Pin
number
Signal
mark
Description Data flow direction
1 GND Signal and supply ground
2 GND Signal and supply ground
3 TxRx- RS485 B (-) Input/Output
4 TxRx+ RS485 A (+) Input/Output
5 TxRx- RS485 B (-) Input/Output
6 TxRx+ RS485 A (+) Input/Output
7 +12 V EXT External power supply +10,8 ÷ +15,6V
8 +12 V EXT External power supply +10,8 ÷ +15,6V
ATTENTION! External power supply is for converter RS485G. Power supply is selected on
module PORT2-RS485 by help of jumper, ref. 2.11.
Router UR 5
ETH
PORT1
PWR
Cable KD-2
Router UR 5
ETH
PORT1
PWR
Cable KD-2