User`s manual
Table Of Contents
- Safety instruction
- Product disposal instructions
- Router description
- Contents of package
- Router design
- First use
- Technical parameters
- Recommended literature
- Possible problems
- FAQ
- Customers support
5. ROUTER DESIGN
5.8 Description of the front panel
On the front panel is located:
Caption Connector Description
PWR 2-pin Connector for the power supply adapter.
ETH RJ45 Connector for connection into the local computer network.
PORT1 RJ45 Connector for expansion port RS232, RS458/422, MBUS,
ETHERNET, CNT or SWITCH.
PORT2 RJ45 Connector for expansion port RS232, RS485/422, MBUS,
SWITCH, WIFI, WMBUS or SDH.
GSM SMA Connector for UMTS antenna.
CDMA SMA Connector for CDMA antenna.
AUX SMA (R-SMA) Connector for diversity or additional antenna (WIFI – reverse
connector, WMBUS).
USB USB-A Host Connector for connection of USB devices to the router. Sup-
ports devices with PL-2303 and FTDI USB/RS232 converters.
I/O 3-pin Connector for connection of the binary input and output.
SIM1 — Holder for the first SIM card.
SIM2 — Holder for the second SIM card.
Table 5: Front panel description
Figure 10: Front panel UCR11 v2F SL
12