User`s manual
Table Of Contents
- Safety instruction
- Product disposal instructions
- Router description
- Contents of package
- Router design
- First use
- Technical parameters
- Recommended literature
- Possible problems
- FAQ
- Customers support
5. ROUTER DESIGN
• before mounting a router on sheet-steel we recommend using an external antenna,
Figure 5: Space around antennas
• For every cables we recommend to bind the bunch according to the following picture, we
recommend for this use:
– Length of the bunch (combination of power supply and data cables) can be max-
imum 1,5 m. If the length of data cables exceeds 1,5 m or in the event of, the
cable leads towards the switch – board. We recommend installing over – voltage
protectors (surge suppressors).
– With data cables they mustn’t carry cables with reticular tension ∼ 230 V/50 Hz.
– All signals to sensors must be twisted pairs.
Figure 6: Cable routing
9