User`s manual
Table Of Contents
- Safety instruction
- Product disposal instructions
- Router description
- Contents of package
- Router design
- First use
- Technical parameters
- Recommended literature
- Possible problems
- FAQ
- Customers support
5. ROUTER DESIGN
5.4 Ordering codes
Order codes are given for the Polish operator Orange. Another operator can be selected
by changing two digits according to Table 3 Version of firmware module on page 6.
Expansion port Possible participation Ordering code
Version without expansion port UCR11 v2F-01 set
Version with Ethernet exp. port PORT1 UCR11 v2F-01 ETH set
Version with RS232 exp. port PORT1 a PORT2 UCR11 v2F-01 RS232 set
Version with RS485 exp. port PORT1 a PORT2 UCR11 v2F-01 RS458 set
Version with MBUS exp. port PORT1 a PORT2 UCR11 v2F-01 MBUS set
Version with CNT exp. port PORT1 UCR11 v2F-01 CNT set
Version with SWITCH exp. port PORT1 + PORT2 UCR11 v2F-01 SWITCH set
Version with WIFI exp. port PORT2 UCR11 v2F-01 WIFI set
Version with WMBUS exp. port PORT2 UCR11 v2F-01 WMBUS set
Version with SDH exp. port PORT2 UCR11 v2F-01 SDH set
Table 4: Ordering codes
Second expansion port is written after first expansion port in the ordering code.
Example:
• Full version with Ethernet and RS232 port: UCR11 v2F-01 ETH RS232 set.
• Full version with Ethernet and RS232 port in metal cover:
UCR11 v2F-01 ETH RS232 SL set.
Router is standardly fitted with a diversity antenna for HSPA+. However, UCR11 v2 can be
fitted with a diversity antenna for CDMA on customer’s request. In this case, it is necessary to
write capital letter D behind two digits indicating the operator in ordering code.
Example:
• UCR11 v2F-01D ETH RS485 set.
7