User`s guide

ROUTER DESCRIPTION

5.7.4. SIM card reader

The SIM card reader for 3 V and 1.8 V cards is located on the front panel of the router.

To initiate the router into operation it is necessary to insert an activated SIM card with

unblocked PIN in the reader. The SIM cards might be of different adjusted APN (Access Point

Name).

Changing the SIM card:

Press the small yellow button to eject the reader holder. Insert the SIM card into

the reader holder and slide it in the reader (see figure bellow).

Fig. 22: Ejected the SIM card

5.7.5. Ethernet port

Panel socket RJ45.

number

Signal mark Description Data flow direction

1 TXD+ Transmit Data – positive pole Input/Output

2 TXD- Transmit Data – negative pole Input/Output

3 RXD+ Receive Data – positive pole Input/Output

4 --- ---

5 --- ---

6 RXD- Receive Data – negative pole Input/Output

7 --- ---

8 --- ---

Table 9: Connection of Ethernet connector

Fig. 23: Ethernet connector

ATTENTION! Port ETH is not POE (Power Over Ethernet) compatible!